Dirty Air Basic Front and Rear Air Ride Suspension Shock System Harley Touring

BRAND NEWPART # DA-BFRFits Harley Touring Models**MUST MAKE A NOTE ABOUT YEAR AND MODEL AT CHECKOUT**2013 and older models will receive “cut” front fork springs2014-2016 will use the factory fork springs.2017 and newer will receive different fork springs**FORK CAPS FOR STOCK TREES ARE INCLUDED – AFTERMARKET TREES OR MODELS WITH AIR ASSIST REQUIRE DIFFERENT CAPS**
For HD Touring models.  Complete rear system, and complete front system.  Includes 2 compressors with year specific mounting brackets, rear shocks, front air pistons and springs for applicable models, 2 dump manifolds, and all tubing/fittings/wiring etc to complete installation.  1 compressor operates the front, and one operates the rear.  Lifts most touring model bikes in approximately 13 seconds.  
Other option runs the complete system off of one compressor, and includes the proper valving to distribute flow up/down front/rear.  Front and rear operate separately, front takes approximately 13 seconds and rear takes approximately 13 seconds.  Please not this valving is not sufficient for incorporating an air tank!  Made to run as-is, not to add a tank!
Steel shocks measure 9.5″ collapsed, 13.25″ extended (measured bolt-center to bolt-center)
Aluminum shocks measure 9.5″ collapsed, 13.75″ extended (measured bolt-center to bolt-center)
Please note, with front+rear air, the frame of the bike will sit low enough that the stock kickstand (or even a lowered kickstand) will not allow the bike to lean over far enough to rest securely.  An electric center stand is highy recommended for bikes with front+rear air.