Brock’s Performance OEM Replacement Burnished Swingarm Harley Touring 2009+

BRAND NEWPART # 604335
FITS: 2009 and up Harley Touring models (FLHT,FLHR,FLTR, FLT)
 Handcrafted 6061-T6 aluminum extended swingarm100% bolt-on design can be used with OEM rear wheel, caliper, spacers and associated components Proprietary custom extrusion made exclusively for Brock’s PerformanceExtends wheelbase from stock to 3 inches overDesigned for use in high-power, high-torque applicationsIncludes centerless ground hollow 4130 chromoly axleReversible billet aluminum axle adjusters for easy wheel adjustmentsIncludes caliper bracket for use with OEM calipersPTFE® lined spherical bearings from Worldwide Bearings preinstalledIncludes bushings to use the OEM 3/4” pivot shaftInterior swingarm width measures 10 7/8” at the axle(accepts 200 series rear tire on 6.75” wide rim with chain conversion)42% weight savings vs OEM swingarmDesigned, machined, and assembled in the USABurnished raw aluminum finishShock Information:3-position shock mounts allow flexibility in ride height (stock, -1”, -2”)Compatible with shock lengths up to 12.75”13” shocks will fit but must be used in the -1” or -2” position(See West Coast Bagger for longer shock)H-D Premium Ride Touring Shocks will only work in the stock shock positionBrock’s Performance recommends adjustable Bitubo shocks for best performance and adjustabilityWhat do you get when you combine 25 years of sportbike drag racing and innovation with a V-Twin industry cry for a swingarm that can handle the ever-increasing demands of ultra-powerful baggers? Introducing the Performance Bagger Swingarm™, by Brock’s Performance. Leaning heavily on technology proven in the ‘stupid fast’ turbocharged sportbike area, our tubing, bracing, billet aluminum ends and 28mm Chromoly axle configuration routinely control 750 hp/350 ft-lb no wheelie bar missiles in 6 second/220MPH action.Adapting this winning combination for smooth operation and long street life for your FL, we installed replaceable PTFE® lined spherical bearings from Worldwide Bearings at the pivot loops. Adding a bit of flexibility to the stance and chassis tunability in the rear, billet 3-position shock mounts are standard allowing for stock height, -1”, and -2” mounting positions. Speaking of flexibility, check out the billet bolt-on brake stay designed to function with the OEM brake hanger. In fact, Brock’s Performance Bagger swingarm is 100% bolt-on using your OEM rear wheel, spacers, and pulley or your favorite aftermarket replacement rear wheel.Don’t forget the extra 3” length can be worth as much as 3 tenths improvement in the 1/4 mile. The bottom line, weighing in at a little over 1/2 the weight of the OEM swingarm and built to handle as much power as you can throw at it, moving/bent axles can now be a thing of the past, and you can look great and go faster too. Performance Bagger Swingarm Weight:Swingarm w/Bearings: 11.10 lb. (5.04 kg)Axle w/Nuts:25mm – 2.48 lb. (1.12 kg)28mm – 2.77 lb. (1.26 kg)Axle Blocks:25mm – 0.76 lb. (0.35 kg)28mm – 0.74 lb. (0.34 kg)Pivot Bushings: 0.43 lb. (0.20 kg)Brake Mount w/Screws: 0.55 lb. (0.25 kg)25mm Total = 15.32 lb. (6.95 kg)28mm Total = 15.59 lb. (7.07 kg)OEM Harley-Davidson® Swingarm Weight: 22.78 lb. (10.33 kg)OEM Harley-Davidson® Axle Weight: 3.55 lb. (1.61 kg)Total = 26.33 lb. (11.94 kg)Total Weight Savings = 11.01 lb. (4.99 kg) or 42% of OEM weight